Post Your Dyno Charts Here Please
This is the place to post your dyno charts.
Please post your build info so they are useful. |
Some Links
Until we get some tuning done.
Latus motors: Click the blue Dyno Charts "Click Here", you may want to read the article first. It explains their testing methods. http://www.latus-harley-davidson.com/dyno_charts.asp Revperf: http://www.revperf.com/artman/publis...ynosheets.aspx GMR's site: http://www.gmrperformance.com/GMRPer...yno_Charts.htm Big Boyz: http://www.bigboyzcycles.com/dyno.htm |
http://img.photobucket.com/albums/v2.../Dyno-Tune.jpg
Here's my dyno which upped my sert download quite a bit!!! 07'FLHTC 96" Rinehardt TD Ness bs a/f Torque= 86.95 HP=74.73 |
2006 FLHTCUI
Stage I 95ci SERT 2:1 Thunder Headers 4th gear run http://img.photobucket.com/albums/v4...y423/stan1.jpg |
1 Attachment(s)
95"
37b python 2-1 |
Last summer.
95" with SE flat tops Stock Heads (Had to see what it would do) 37g SE 65115-98B mufflers http://www2.suite224.net/~msocko/06Dyno.jpg Since the build I decided I wanted more bottom end sooner so I advanced the cams 2 deg and put the Supermeg on. Going to tweek it and ride it this summer and see how things feel. |
http://i78.photobucket.com/albums/j9...ke_pic_063.jpg
Builds a 98 rev perf 9.7 to 1 kit GMC CNC heads DTT adj ignition CV44 carb(with chrome top cover of course) Propipe 37Gcams baisely spring GMR lifters Zippers A/c with S/e backplate |
I've only seen one so far the even remotely resembles a pissed off seagull prepared to take your eyeballs out, that being the result of a doof clena fuel curve.
What gives? |
1 Attachment(s)
Customers bike
98 inch CNC heads 37 g 9.8.1 Mik 42 V&H big shots staggered:nope: |
1 Attachment(s)
Customers bike
98 inch Welded head 1.9/1.625 615/585 10.5.1 V&H pro pipe (one row of holes in baffle closed off) Sert ness big sucker |
1 Attachment(s)
98 inch
37g stock t/b V&H true duals se slip ons Se a/c PCiiiUSB |
HDWRENCH,
Great max numbers. Anyway to pull that torque back into the lower ranges? I rarely ride at 4grand. Gas is outta site nowadays. But can that kinda torque be between 2.5 and 3.5? |
Dyno sheet
98
GMR Head Work 37G cams SE exhaust |
Quote:
|
Intermediate results on my bike
Otto's still not done tuning, but we both ran out of time. He thinks there should be some more in there. I'll post the best run (run 57) and that compared to the final run.
Details on the build are Revperf 98" Screaming Eagle High performance heads with a little porting. Milled to 75 cc combustion chambers .030 head gasket Dakota kid throttle body Screaming Eagle Mufflers (when they were made by Cycle shack) Red Shift 577 Cam with Andrews Gear Drive. Intake--25/100/47 Exhaust-50/104/22 http://www.millfam.org/linkpix/engine/dyno/run57.jpg http://www.millfam.org/linkpix/engine/dyno/run57&67.jpg http://www.millfam.org/linkpix/engine/dyno/run57.pdf http://www.millfam.org/linkpix/engine/dyno/run57&67.pdf |
All times are GMT -5. The time now is 04:50 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2006 - 2020 doofclenas.com, LLC
The Doof Clenas 43 logo is a registered trademark of doofclenas.com, LLC