relocate front turn signals
1 Attachment(s)
I bought a Dragonfly fairing from Fire46 here a couple weeks ago so now I have to move my turn signals. I have passing lamps like the ones in the photo. Do I need to buy new turn signals? If so, what part #? Can I reuse the stock on a 2004 RK Custom? Do I need other hardware?
Please enlighten me! |
HELLO! I THOUGHT YOU DOOFS WERE SUPPOSED TO BE GOOD AT THIS STUFF? GIVE A BROTHER A HAND, WILL YA?????
:Hurt: :huh: :KissAss: :Pete_Logan: :Parking_Lot_Doofs: |
Quote:
|
1 Attachment(s)
Thanks for responding Gordo! They are the stock bullets attached to the handlebars like this:
|
Here is what I did to relocate the turn signals from handle bars to lower fork slider.
http://www.v-twinforum.com/forums/sh...light=relocate Not sure if it will work with the batwing. If it does, you will need to notch the lower fork slider at the rear to feed the wires. The excess wire can be left behind the tin. You may need nuts and washers (spacers) if the turn signals on the bars act as the fastener for the mirrors. Acorn nuts are a nice touch. Or you could by the relocation kit made to mount below your passing lamps. |
All times are GMT -5. The time now is 12:54 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2006 - 2020 doofclenas.com, LLC
The Doof Clenas 43 logo is a registered trademark of doofclenas.com, LLC