King Tour Pak on 2008 Street Glide
 

I got a good deal on a King Tour Pak recently. The quick release mount on it doesn't seem to fit the passenger backrest hardware on my bike. Anyone have this issue? Ideas as to what hardware I need to make this fit?

Here's an example pick of the hardware set up on what I bought.

Hard to tell from the picture Bud.

Is that considered the 2 point or 4 point docking hardware?

For the 2 pt, the front of the mount goes in behind the shocks on my 2011 SG. The rear two mount points went to the 2 pt docking station on the left/right side of the fenders.

I took off the 2 pt unit and went to a 4 pt for my tourpack. Doesn't use the points behind the shocks now.

The trunk doesnt use same points as the backrest/luggage rack~
For the Tour-Pak you need part # 53276-09A to use the same points~

Wait.. That's for '09 & up!!

Ok,, 53303-07 to mount the trunk & 53803-06 for sissy bar (as they called it)

Yup, different front mount point.

Thanks guys! I had some parts laying around from the old bike and found I have the gear I need to mount the tour pak. It came with the hardware in the pic. Wasn't sure what mounting hardware I need on the bike to attach to. Looks like the 53803-06 is what I have.

Good news. :w00t:

I took the old hinges off the tour pak for paint. I picked up the premium latches today so I didn't have to play with rivets. It doesn't come with the hinges for the side of the tour pak that doesn't have latches.

Where can I get replacements for these that don't require rivets?:blink:

http://img.tapatalk.com/ae3210a7-63db-eb0a.jpg

http://img.tapatalk.com/ae3210a7-63e4-9b4d.jpg

http://img.tapatalk.com/ae3210a7-63ec-d960.jpg

Thanks Noodles! Never thought of that... I have some here on the shelf!

:roflback::woohoo:

ahahahhaahah!!!!!!!!!!!!!!!!!!!

I would call that the "Hillbilly Fix", but it is much more than that. So I will refer to it as the "HillWilliam Repair".