Changing out seals and O ring Inner Primary
Had some oil leaking from under the bike. Seemed to be coming from the main trans seal and Large O-Ring. Took it all apart and replaced the large seal in the Primary, the Starter seal ( kinda a Bitch) as it is down about an inch or so, and finally the Big O-Ring. All I got left is putting the clutch, chain and Comp sprocket back in. I should finish up tomorrow and Hopefully I did It right. Here's a couple of pix
Note; the bike has 74K on it.
Last edited by dynageno; 12-17-2011 at 12:54 AM.
|