Quote:
Originally Posted by Fe Butte
1/4" 12 point socket, Not an "E" socket, for the pad retaining pins, putty knife(s) to slip between the pad(s) and rotor to retract the pistons, remember to take out brake fluid in the master cylinder to allow the fluid at the pistons to have some place to go. PUT! THE TOP BACK ON!!! before pushing the pistons in. Or fluid will get on your paint, chrome and other stuff.
|
Thank you. I'll put your points on my note pad.
Quote:
Originally Posted by y2kflhr
what everybody else said, 1/4 12pt socket, putty knife, brake cleaner.....call me if you have problems
|
Yes Sir. I'll be doing this probably next week.