I'm in.
Now getting to that pinch bolt at the top of the stem is going to need a Ball Tip Hex driver (Socket)...
To sneak past all the wires and radio crap, or face more parts coming off to get to it.
this...
https://store.snapon.com/Ball-Hex-St...t-P651591.aspx
Which you could use a good 5/16" socket to fit it into. Edit: get the bit and a good 5/16" 1/4" drive universal socket (like a Snap-On) because that is what I have on hand and it worked, held up to the 25 ft lb of the torque wrench when I tightened the pinch bolt.
Or this... >>> Edit not this below, not enough room.
https://store.snapon.com/Ball-Hex-St...r-P631245.aspx
Sadly I have no tool trucks that come through town.
.