#1
|
||||
|
||||
A LITTLE HELP PLEASE.....
Looking to attatch a Sansung Note 4 to handle bars of an '06 Ultra.
ProClip makes something, but curious as to what else is out there. What everybody else is useing. yada yada yada. Any help will be appreciated.
__________________
Last edited by dzlfitr; 03-21-2015 at 06:46 PM. Reason: FTDS |
#2
|
||||
|
||||
__________________
Master of Contemplation |
#3
|
||||
|
||||
__________________
------------------------------------------------ I know you think you understood what I said, but I'm not sure you realize that what you heard is not what I meant." [
|
#4
|
||||
|
||||
I thought there was an outfit in Texas.
__________________
|
#5
|
||||
|
||||
__________________
I'm not saying it was your fault. I said I'm blaming you. Ricky it's only metal, we can out think it..... Simplicate, never Complify http://www.FraZzledEgGs.com Rhetorical Questions.... Who Needs 'em? ... Famous Tripod
|
#6
|
||||
|
||||
__________________
Master of Contemplation |
#7
|
||||
|
||||
__________________
Kimber |
#8
|
||||
|
||||
RAM X-Grip...
Mounted up with other RAM hardware.. I mounted to my mirror. Bottom, and came under the bars, it's actually pretty clean looking. This is my PV2, but same conept... ...pardon my dust. Here is what I used, from their website. You can take their part numbers and find them less expensive elsewhere... I've collected parts and pieces over the years from different projects. These are in order, from the mirror to the unit, I did not include my specific mount, and I believe the X-Grip comes with an arm.... I'll post it last. Under the mirror I also used a washer between the acorn nut and this base. http://www.rammount.com/part/RAM-B-252U First arm: http://www.rammount.com/part/RAM-B-201U Adapter (I Plastidipped the aluminum arm): http://www.rammount.com/part/RAM-B-230U Short arm going up to the PV2: http://www.rammount.com/part/RAM-B-201U-A Here is the X-Grip, and 4" arm... You could do away with the first arm I posted above... http://www.rammount.com/part/RAP-HOL-UN7B-201U
__________________
Hi, my name is Chip, and I am a Poser. Frac Rat ~ Stimulator of Holes ΜΟΛΩΝ ΛΑΒΕ From my Brother Don... I love his insight. Quote:
|
#9
|
||||
|
||||
+1 on the X grip. I have a couple of them in my vehicles and they work great on the different phones I have had, with or without phone cases.
I liked using them so much, I also have the bigger X grip to hold my iPad. Worked just fine whether it was my iPad 1st gen and then when I bought iPad Air, again with or without the Otterbox, it adjusts and holds them in place nicely.
__________________
|
Thread Tools | |
Display Modes | |
|
|