#1
|
||||
|
||||
Torque values for handlebar clamps?
Does anyone have a manual handy that can tell me what is the correct amount of ft/lbs to torque the 4 bolts that secure the handlebar clamp? I hit a ridge in front of some railroad tracks a little "briskly" launching myself vertically off the seat and when I came down I pulled the handlebars down towards my lap about an inch or so.
Trying to reposition and tighten things back up to avoid that awkward feeling you get when your handlebars pivot down to your knees at speed DK
__________________
|
#2
|
||||
|
||||
for a touring bike
16-20ft-lbs, 21.7-271.nm
__________________
BAAAA BAAA BAAA "Blame Russ in 2012" "Can We Still Blame Russ in 2013" who's to blame in 2014? OH THIS IS SO NOODLES FAULT Chitty Chitty |
#3
|
||||
|
||||
Should have been specific- it's a '08 Dyna super Glide.
Would it make a difference?
__________________
|
#4
|
||||
|
||||
Don't know my dyna manual is at home..... Sorry
Sent from my ADR6300 using Tapatalk 2
__________________
BAAAA BAAA BAAA "Blame Russ in 2012" "Can We Still Blame Russ in 2013" who's to blame in 2014? OH THIS IS SO NOODLES FAULT Chitty Chitty |
#5
|
||||
|
||||
checked my "aftermarket manual" for the dyna and it doesn't list a spec.....
__________________
BAAAA BAAA BAAA "Blame Russ in 2012" "Can We Still Blame Russ in 2013" who's to blame in 2014? OH THIS IS SO NOODLES FAULT Chitty Chitty |
#6
|
||||
|
||||
There's a spec. I don't have it, though.
If they're crooked after you tighten them, though, I can help with that...
__________________
Just another damn "Dave" Decidedly unpleasant, does not play well with others. Fluent in Pidgin Cigar Spanish. http://sherlynpopelka.net/ Revelation 19:11 And I saw heaven opened, and behold a white horse; and he that sat upon him was called Faithful and True, and in righteousness he doth judge and make war. *Usual manly disclaimer applies, if applicable.
|
#7
|
||||
|
||||
you are way to helpful....
__________________
BAAAA BAAA BAAA "Blame Russ in 2012" "Can We Still Blame Russ in 2013" who's to blame in 2014? OH THIS IS SO NOODLES FAULT Chitty Chitty |
#8
|
||||
|
||||
tighten front 12-16 Ft Lbs then rear 12-16 ft lbs then tighten lower handlebar clamps 30-40 ft lbs install spedo cover tighten 50-60 in lbs riser cover 50-60 in lbs out of my 08 service manual
__________________
: Last edited by MasterGunz; 08-15-2012 at 07:20 PM. |
#9
|
||||
|
||||
Ah!
Thanks much! DK
__________________
|
#10
|
||||
|
||||
there is always russ's method, tighten it till it breaks....
__________________
BAAAA BAAA BAAA "Blame Russ in 2012" "Can We Still Blame Russ in 2013" who's to blame in 2014? OH THIS IS SO NOODLES FAULT Chitty Chitty |
#11
|
||||
|
||||
Fixed it for you.
__________________
. . Meng TKWSV |
#12
|
||||
|
||||
no then blame the moco....
__________________
BAAAA BAAA BAAA "Blame Russ in 2012" "Can We Still Blame Russ in 2013" who's to blame in 2014? OH THIS IS SO NOODLES FAULT Chitty Chitty |
#13
|
||||
|
||||
I don't use a torque wrench on my Dyna. I just tighten the sh!T out of them.
__________________
Cloudrider 2010 Former Original Doof Creator of the 43 & 7 hand signs... |
#14
|
||||
|
||||
don't forget the loctite.
__________________
comforting the disturbed. disturbing the comfortable. Todd |
Thread Tools | |
Display Modes | |
|
|