#1
|
||||
|
||||
Rear Brake Vibration, 2010 Ultra w/ ABS
I'm trying to chase this down. I would be happy to get your input.
Upon moderate to heavy rear brake application I'm getting a pretty heavy vibration seemingly from the rear of the bike. It's been happening for a while and it doesn't feel like it's getting markedly worse or as if something's about to fall off. It feels like a warped rotor or metal to metal pad contact. It's not ABS activation. I'm pulling it down tonight to inspect everything and I have new bearings in hand if needed. At light application the rear brake is smooooooth. It's only after getting on it hard that the vibration occurs and it's quite consistent and linear. You can modulate pedal pressure and vary the vibration. I'm fully expecting to find a crapped wheel bearing or a cracked rotor; some obvious 'smoking gun' would be nice. Btw: clutch/throttle/ load/ gear/ lean angle/ doesn't make any difference. I'll let ya know what I find but give me your best guesses. EDIT: bike has 18,782 mi. Rear amer elite has 6300 mi.
__________________
I'm not saying it was your fault. I said I'm blaming you. Ricky it's only metal, we can out think it..... Simplicate, never Complify http://www.FraZzledEgGs.com Rhetorical Questions.... Who Needs 'em? ... Famous Tripod
|
#2
|
||||
|
||||
Don't have the wheel all the way off and already found something completely unexpected
__________________
I'm not saying it was your fault. I said I'm blaming you. Ricky it's only metal, we can out think it..... Simplicate, never Complify http://www.FraZzledEgGs.com Rhetorical Questions.... Who Needs 'em? ... Famous Tripod
|
#3
|
||||
|
||||
__________________
Stoney ALL WHO WANDER ARE NOT LOST. GFFG
|
#4
|
||||
|
||||
Axle froze on a bearimg?
__________________
|
#5
|
||||
|
||||
Skill saw blade made into a horn bracket dangling in the spokes?
__________________
Hi I'm Tom. Darned if I can remember anyone else's name. MDCGA The Road Goes On Forever... To Ride is Life... In search of the Doof 43. . . . ....... . . Colorado Motel Wreckers 2012 ... Midnight Riders of The Beartooth 2013... |
#6
|
||||
|
||||
They all do that...
At least my 2012 Ultra limited does too. Only feel it in the pedal and the back tire acts like it's almost ready to lock up. I didn't notice it before the first time I actually tried the ABS out...
__________________
If at first you don't succeed then skydiving definitely isn't for you - Steven Wright |
#7
|
||||
|
||||
This. I've had the same feeling.
__________________
Kimber |
#8
|
||||
|
||||
...if you let Russ anywhere near it, you're gonna have problems...
|
#9
|
||||
|
||||
1.) horn bracket looks awesome
__________________
I'm not saying it was your fault. I said I'm blaming you. Ricky it's only metal, we can out think it..... Simplicate, never Complify http://www.FraZzledEgGs.com Rhetorical Questions.... Who Needs 'em? ... Famous Tripod
|
#10
|
||||
|
||||
Tire, pulleys, isolator, bearings, pads look very good.
I removed the bearings and opened each one, all are perfect. Added grease, replaced seals. I'm actually thinking that the vibe might be the tire. It looks about halfway gone at only 6500 miles. The part that does not look good... Is the belt. The sprockets look great, but the belt is ugly. Every fourth tooth all the way around is damaged and about a third of those have chunks missing. I can't find any problem with the pulleys save for a single "chip" in the rear. What would cause this? Rocks? Tension? Wheelies? The "every fourth" part is really weird. Before ES I had actually bought the bonafide HD tension tool and adjusted per the book. Even though done perfectly, it seemed too damned tight to my thinking. I triple-checked the adjustment and left it like that. Then I proceeded to the crap out of it for a while. Today I rechecked it using the tool. It's a bit looser than spec now. I've about decided that this damage is from being overly tight. Feel free to discuss
__________________
I'm not saying it was your fault. I said I'm blaming you. Ricky it's only metal, we can out think it..... Simplicate, never Complify http://www.FraZzledEgGs.com Rhetorical Questions.... Who Needs 'em? ... Famous Tripod
Last edited by MrSurly; 07-17-2014 at 03:16 PM. |
#11
|
||||
|
||||
First -- The ABS -- all ABS systems deliver the thump thump when applied vigorously. It is the nature of the system that keeps the brakes from locking up as it applies and releases. It's just that some are more noticeable than others. The important thing to note is that they don't lock up and you keep going in a straight line.
Second -- The Belt -- It appears that you are correct in your thoughts. I lean towards the fact that you had it over tight before you left.
__________________
April 13, 2016 -- The day Richard was speechless. May your hands always be busy, May your feet always be swift. May you have a strong foundation When the winds of changes shift. May your heart always be joyful, and may your song always be sung, May you stay forever young! --Bob Dylan |
#12
|
||||
|
||||
Just to clarify,
The vibration is not ABS kicking in. I'm pretty familiar with that operation. This is happening well below traction limit (in my best assessment ). Unless the ABS has some abnormal way that it operates that it isn't supposed to do. No, this feels just like a badly warped rotor. Except that it's smooth at lesser application. Despite the phukt belt, I doubt the belt is causing the vibe, but I don't know. Sent from my iPhone using Tapatalk
__________________
I'm not saying it was your fault. I said I'm blaming you. Ricky it's only metal, we can out think it..... Simplicate, never Complify http://www.FraZzledEgGs.com Rhetorical Questions.... Who Needs 'em? ... Famous Tripod
|
#13
|
||||
|
||||
Loaded TapATalk again. (Sigh) the iPhone makes pic attachment far too difficult without it.
Sent from my iPhone using Tapatalk
__________________
I'm not saying it was your fault. I said I'm blaming you. Ricky it's only metal, we can out think it..... Simplicate, never Complify http://www.FraZzledEgGs.com Rhetorical Questions.... Who Needs 'em? ... Famous Tripod
|
#14
|
||||
|
||||
Ricky;
Not saying you didn't, but did you measure belt deflection with the tire in the air or on the ground and use the corresponding recommended measurement for the tire position? They are different. As far as the "vibration". I can make the rear brake make a grating feeling with a fair amount of brake, but not fully engaging the ABS, but only with being a little firmer. Normal riding it's smooth as glass. Oh, and aren't those sealed bearings?
__________________
Kimber |
#15
|
||||
|
||||
You did what to the engine on hush hush so you could blow someone's saddlebags off at ES?
The drive belt got narrower back when Harley started putting the 140 size tire on the rear. Not sure how wide the belt is on the '09 and up touring bikes. But it's gonna wear faster (break down) when more HP and torque is thrown at it. Maybe every forth tooth is the cylinder power hit causing that? I'm just throwing poo at the wall and seeing if it sticks... But if you built up a hot rod with massive HP wouldn't you install stronger "bigger" U joints?
__________________
Hi I'm Tom. Darned if I can remember anyone else's name. MDCGA The Road Goes On Forever... To Ride is Life... In search of the Doof 43. . . . ....... . . Colorado Motel Wreckers 2012 ... Midnight Riders of The Beartooth 2013... |
|
|