#1
|
||||
|
||||
razzle frazzle grrrrrr
No cruise, no turn signals, no brake lights, no horn.
I had some difficulty reseating a couple of pins in the Molex's, So i am rechecking them Found 2 pins on the right side that were not in all the way, popped them in and now the damned connector wont click back together. GRRRRRrrrrrr
__________________
Robert Oil, heat, vibration and noise. At work, oil analysis, thermography, vibration analysis, and ultrasonics. At play, Harley. Same same, right? Only 43 more states to go! Remember, never make a straight on a left hand bridge. It WILL leave a mark. |
#2
|
||||
|
||||
Have you been hanging out with russ?
Sent from my ADR6300 using Tapatalk 2
__________________
BAAAA BAAA BAAA "Blame Russ in 2012" "Can We Still Blame Russ in 2013" who's to blame in 2014? OH THIS IS SO NOODLES FAULT Chitty Chitty |
#3
|
||||
|
||||
You need a bigger hammer.
__________________
Hi, my name is Chip, and I am a Poser. Frac Rat ~ Stimulator of Holes ΜΟΛΩΝ ΛΑΒΕ From my Brother Don... I love his insight. Quote:
|
#4
|
||||
|
||||
and tin snips
__________________
Frank 2009 Vivid Black Street Glide Ultra RIP Diver, Bashful, Smitty, Clank, Johnny B, Fire46, Red Rider and Mongoose, GBNF "It is foolish to mourn the men that died. Rather we should thank God that such men lived" -General George S. Patton, Jr. |
#5
|
||||
|
||||
Robert, did you take pictures BEFORE you took it apart?
__________________
Kimber |
#6
|
||||
|
||||
Pictures?...
__________________
® |
#7
|
||||
|
||||
or copy's??..
__________________
® |
#8
|
||||
|
||||
Funny, mine worked right the first time.
__________________
You might be a king or a lowly street sweeper, but sooner or later you dance with the reaper. Make Doof Clenas Fun Again (MDCFA) |
#9
|
||||
|
||||
it was the third and fourth time that you fugged it up.....
__________________
BAAAA BAAA BAAA "Blame Russ in 2012" "Can We Still Blame Russ in 2013" who's to blame in 2014? OH THIS IS SO NOODLES FAULT Chitty Chitty |
#10
|
||||
|
||||
Not worried about cross wiring, it is an assembly issue. Everything worked once, vibration kilt it.
I am a vibration specialist, I gotta reseat them and defeat the beast.
__________________
Robert Oil, heat, vibration and noise. At work, oil analysis, thermography, vibration analysis, and ultrasonics. At play, Harley. Same same, right? Only 43 more states to go! Remember, never make a straight on a left hand bridge. It WILL leave a mark. |
#11
|
||||
|
||||
Pinched wire, severe lack of room in the dimple.
Repaired, taped, and pre compressed using eye bolts and the clamp. Added a SS shim stock bridge to keep the gp clear and all is well. Now, about those damned Molex connectors.....
__________________
Robert Oil, heat, vibration and noise. At work, oil analysis, thermography, vibration analysis, and ultrasonics. At play, Harley. Same same, right? Only 43 more states to go! Remember, never make a straight on a left hand bridge. It WILL leave a mark. |
Thread Tools | |
Display Modes | |
|
|