|
|||||||
Ask The Techs... This is the way it works. Post up your question in the appropriate Forum, then put a link to it here. We'll ask some very savvy folks to monitor the posts here and answer your question. If you are a Tech answering a question, please do it in the linked thread rather than here. In this way, we can build info in the appropriate Forum. Thanks. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Bearing noise
This is on a crankshaft of my sled, but though I would ask anyways.
Should the needle bearing, on the rod make any noise when spinning? What aboout ball bearings? The ball bearings on the end make noise, byut none of the other ones do. Also the needle baring on the mag side seems a little noiser, which is the side I heard the noise on, before I tore it down. I sprayed some wd-40 and pblaster, and it quited little. Think I am going to brink it to a crank shop. But just curious if you guys had any input on diagnoising bearing failure. |
#2
|
|||
|
|||
A noisy bearing is a bearing on it's way to death! The noise come from flat spots on the balls or the rollers.
|
#3
|
||||
|
||||
Hmmm...must be a Cat.
__________________
Dan '08 Ultra S&S SPO's |
#4
|
|||
|
|||
Nope Polaris triple.
|
#5
|
||||
|
||||
Quote:
__________________
Jim |
#6
|
||||
|
||||
I had a Cushman 700 triple. Nothing sounds quite like a 2 stroke triple...
Ever heard those old Vespa GT 380 or 550 triples? Those were sweet also.
__________________
Dan '08 Ultra S&S SPO's |
#7
|
|||
|
|||
I got long fingers,its why the ladies love me.
|
#8
|
|||
|
|||
I got a kaw stroke triple 500 street bike, a 1974 H1. Its in peices. Will either make a bar decoration or a project bike.
|
#9
|
||||
|
||||
well unless it's the barely legal ones that you say you can't get ........ jus sayin'
__________________
Her badonkadonk ........ nuff said !!! States I've ridden my scoots in: |
#10
|
|||
|
|||
Best thing to do is probably bring to a pro. There is a guy I got off snowmobile forum, who specializes in triples. I was going to press the outer ones on myself. But think I am going to bring it him. I want to be sure whats bad.
|
#11
|
||||
|
||||
Maybe you missed your calling as a proctologist.
__________________
Jim |
#12
|
||||
|
||||
Define "noise". All of them will make some noise simply because you have metallic objects running against each other. If it remotely resembles grinding, then ya got issues.
__________________
Tim Ancient '79 FXS w/ probably about the same HP as a tractor Equally ancient '79 Massey Ferguson 255 Somewhat dilapidated, yet functional, Kubota L2500 '20 Branson 3620 '18 Ram 3500 Diesel '02 Wrangler X, 4" lift on 33 x 12.50s Wilderness Systems Tarpon 140 Felt Nine 50 Killin' more bees than Monsanto . . |
#13
|
||||
|
||||
I don't think he missed it....... he's always got his hand in the $hit when he's typing here. just sayin' Joe
__________________
ISAIAH 6:1-9 ____________________________________________ for Dana Separated at birth? You decide
|
#14
|
||||
|
||||
Beserker, it's time you became a pirate. I see some of these holy doofs(dewhass and Javi) don't appreciate a cheesehead from cheeseland. We as Gazinta's would be proud to have you. We would call you Mr. President.
Thorns
__________________
On this lonely road, trying to make it home, doing it by my lonesome-pissed off, who wants some? "The right of the people to keep and bear arms." "Gimme back, gimme back my bullets" |
#15
|
||||
|
||||
Quote:
Being called Mr. President don't mean much when the "oval office" is a sheep pen in the nearest pasture. I don't think sheep answer to "Monica" either. just sayin' Joe
__________________
ISAIAH 6:1-9 ____________________________________________ for Dana Separated at birth? You decide
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bearing differences | stoney | Wheels & Tires | 57 | 04-24-2011 09:08 PM |
Bearing installer | BigSwede | Wheels & Tires | 28 | 12-24-2010 09:48 PM |
Inner cam bearing remover | Infidel! | Ask The Techs... | 11 | 03-25-2009 10:53 PM |
Inner cam bearing tools? | jasilva | Random Crap | 25 | 10-30-2008 06:52 PM |
I come bearing gifts.... | FinalBags | Eureka Springs Doofapalooza '08 | 14 | 06-06-2008 09:10 AM |