|
|||||||
General Maintenance & Service Doing it yourself or having it done... |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Wheel Bearings
The OEM bearings are Chinese and expensive. they are a 1x52x21 sealed double roller brg. Is anybody aware of an american manufacturer for replacements, Torrington, Timkin etc. I have no luck searching.
__________________
[
|
#2
|
||||
|
||||
They are supposed to be good for over 100K. Why are you replacing them?
__________________
------------------------------------------------ I know you think you understood what I said, but I'm not sure you realize that what you heard is not what I meant." [
|
#3
|
||||
|
||||
my fronts went out at about 30,000, I was unable to find a replacement at any bearing shop, had to go to the MOCO. This was on a 06, they might be different on newer ones? Dealer said they were a wear item and would do nothing for me.
__________________
<a href="http://www.mytriplogs.com" target="_blank"> <img src="http://www.mytriplogs.com/sigs/mtl_create_us_states_map.php?rz=75&vu=vuuvuuuu uuuuuvvvvvvuvuuuvvuuuuvvuvuvvuvuvuvvuuvuvuu" border="0"></img> <br>Free, personalized travel maps at mytriplogs.com</a> <br> </center> |
#4
|
||||
|
||||
129,000 on the 05 bearings, front and rear.
Not a single issue..
__________________
Kimber |
#5
|
||||
|
||||
There should be a number on them that could be cross referenced......maybe.........
|
#6
|
||||
|
||||
It seems they're a proprietary size. Standard bore, metric dimensions. They're a mutt and only way to get them is through the moco or Drag. Both foreign made.
__________________
[
|
#7
|
||||
|
||||
Quote:
Marketing.
__________________
Kimber |
#8
|
||||
|
||||
They are indeed unique and the only other source I ever found for them while I was putting modern wheels on the shovel was a Chinese site that read like a bad dim sum menu.
__________________
Tim Ancient '79 FXS w/ probably about the same HP as a tractor Equally ancient '79 Massey Ferguson 255 Somewhat dilapidated, yet functional, Kubota L2500 '20 Branson 3620 '18 Ram 3500 Diesel '02 Wrangler X, 4" lift on 33 x 12.50s Wilderness Systems Tarpon 140 Felt Nine 50 Killin' more bees than Monsanto . . |
#9
|
||||
|
||||
30 bucks a pop at the MoCo.
__________________
. . Meng TKWSV |
#10
|
||||
|
||||
Nothing at McMaster Carr ?
Sent from my sheep's butt
__________________
BAAAA BAAA BAAA "Blame Russ in 2012" "Can We Still Blame Russ in 2013" who's to blame in 2014? OH THIS IS SO NOODLES FAULT Chitty Chitty |
#11
|
||||
|
||||
I replaced my front wheel bearings on my 08 FXDF with pilot bearings we carry at the truck shop. Exact same dimensions, $4.00 each. Sold by Eaton, I will check for numbers on the bearing itself.
__________________
Clueless43 D.F.F.D. |
#12
|
||||
|
||||
I replaced my front wheel bearings when I changed the front tire...20 bucks each from MoCo. I could feel a small bad spot in one...simple replacement...
__________________
On this lonely road, trying to make it home, doing it by my lonesome-pissed off, who wants some? "The right of the people to keep and bear arms." "Gimme back, gimme back my bullets" |
#13
|
||||
|
||||
You have the bearing tool? I may need to visit soon when I have my tars removed for powdercoating my wheels. I plan to do new bearings since I don't know how they'll handle the heat of the oven......
__________________
Frank 2009 Vivid Black Street Glide Ultra RIP Diver, Bashful, Smitty, Clank, Johnny B, Fire46, Red Rider and Mongoose, GBNF "It is foolish to mourn the men that died. Rather we should thank God that such men lived" -General George S. Patton, Jr. |
#14
|
||||
|
||||
No official wheel bearing tool. Banged the old wheel bearings out, and with a threaded rod, 2 nuts, and washers used with an old bearing...walla, a wheel bearing installer tool that pulls the bearing into place. Note: There is a sleeve between the bearings that must be installed before the second bearing is installed.
__________________
On this lonely road, trying to make it home, doing it by my lonesome-pissed off, who wants some? "The right of the people to keep and bear arms." "Gimme back, gimme back my bullets" |
#15
|
||||
|
||||
Quote:
__________________
Frank 2009 Vivid Black Street Glide Ultra RIP Diver, Bashful, Smitty, Clank, Johnny B, Fire46, Red Rider and Mongoose, GBNF "It is foolish to mourn the men that died. Rather we should thank God that such men lived" -General George S. Patton, Jr. |
|
|