turn signal mirror help

[bigjailerman]

I have the bikers choice turn signal mirrors installed on my bike for about ayear and a half now and one side is now out both running and signal no workie.

I cannot figure how to remove the lens or disassemble the mirror to check/change the bulb. There are 2 screws on the front facing housing -1- on either side if the adjusting swivel ball but it doesn't appear to do anything other than loosen/tighten the adjustment. The 2 halves seem to be pressed together but there has to be a wa to change bulbs........doesnt there?

Anybody have any experience with these

http://shopv-twincycles.com/shop/pro...FRYcagodjFmvlg

now that ive written this, I gess id better check that there is even power to that side since both run and turn are out as well/

thanks for an input

[Type O]

the link on your post has (ask for info) on it they would have all your answers

[bigjailerman]

yes i did ask there too' but im hoping some doofs are smarter and quicker too!! lol

[SafetyMan]

BFH.

That'll fix it.

[Type O]

Originally Posted by SafetyMan

BFH.

That'll fix it.

just what i was thinking

[bigjailerman]

i took out my big channel locks and a rag and was gonna start yanking on them, but i figurred i should try to be more conservative, like say.........

Berserker and bring it to the dealer

Originally Posted by bigjailerman

yes i did ask there too' but im hoping some doofs are smarter and quicker too!! lol

Wanna buy a nice bridge in Phoenix?

Glad to see this post, i was thinking about some of those.... do they have LEDs on the mirror side too? I saw some in Germany like that (front and back) those would be handy...

[Type O]

but do check power and ground first before the BFH

[MegaGlide]

Originally Posted by bigjailerman

i took out my big channel locks and a rag and was gonna start yanking on them, but i figurred i should try to be more conservative, like say.........

Berserker and bring it to the dealer

That's gonna leave a mark.

[SafetyMan]

[bigjailerman]

Originally Posted by Autococker07

Wanna buy a nice bridge in Phoenix?

Glad to see this post, i was thinking about some of those.... do they have LEDs on the mirror side too? I saw some in Germany like that (front and back) those would be handy...

no, just the forward facing side... th ones I originally found that had them on both sides were pricey at the time - like 260 or so for a pair so I got these

I really like them too cause i never liked the stock turn signals and wanted to clean up the front end a bit. gotta be up early tomorrow so Ill probably check it tomorrow after work

[bigjailerman]

btw, it was a power issue

thanks for the help all.....

[dynageno]

Glad to hear it's all taken care of

[Scabbydoo]

Originally Posted by bigjailerman

btw, it was a power issue

thanks for the help all.....

That was my guess, since one of the key features of LED's is that they last for thousands of hours.