|
|||||||
Dealer (MoCo or Indy) Feedback If they are taking care of you, we want to know. If ya got screwed, we need to know. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Vance and Hines Customer Service
Having to deal with VH customer service recently I was pleasantly suprised at how they really did try to help. I do have to say that although they were not completely up to snuf on all their exhaust systems(they didnt know that the exhaust bracket for the 98 and later will not work on the 07-08 pipe due to where they put the O2 sensor bung) but again they did a very good job of getting the other bracket sent out to me free of charge..
Many good words for their customer service department... |
#2
|
|||
|
|||
I emailed them about a how the dam internal baffle in there slip on, wore through, and cut my pipe in half literally. No repsonse, should have called. Might just leave it on the bike, so I can show it to every one the weld marks. They have a fair rep. But I don't know if I will buy there crap.
Last pipe I bought was fatcat. Lost a sale there. |
#3
|
|||
|
|||
Quote:
I would hope that they would give good customer service to everyone but as it usually goes there is always some good and some bad.....bummer that you got the bad.... Do have to admit that the quality is not what I expected on the True Dual headers.. they were chromed but the clamp marks were still on the pipes and the pipe was not smoothed before chroming... I prefer to run without the heat shields but not on these headers... Is the fatcat a dual or a 2 into 1 system? |
#4
|
|||
|
|||
Fatcat is 2-1. But the V&H that failed was a slip on.
|
#5
|
||||
|
||||
I also had a good experience with Vance & Hines Customer Service also. I bought my V&H True Duals and Oval slipons back in 2004, and in 2006, one of the baffles started rattling. I called customer service about the problem, they said they were aware of the issue and took down my name and address. They had two new FedEx'd to my doorstep within two days. Pretty impressive, I thought.
I'd certainly buy from them again.
__________________
Let the world change you and you can change the world. |
#6
|
||||
|
||||
Quote:
It's great to hear about "the good". Give V&H credit where credit is due. I remember I got the "Rinehart Rattle" in Septmeber of '06. I took it back to the dealer. They pulled the baffle out, put it in a vice, flattened it out a bit, and then poundin' the focker back into the can. A new muffler would have been nice, but BUB would not warrantee. The dealer corrected it, either way, no rattle so far. I had Vance and Hines "Long Shots" on '05 Deluxe. They sounded great, looked good and were of great quality. My experiance with V&H is all good. |
#7
|
|||
|
|||
Mine are from 01, so probaly screwed. But I still don't find it acceptable.
|
#8
|
|||
|
|||
My V&H Propipe collector came with a couple of tiny little chips in the chrome. Might have happened in the UPS truck; who knows? But V&H didn't hesitate; they just shipped a new collector free of charge. Can't beat that.
And when Idiot Boy (me) couldn't figger out the clamping procedure, they walked me through it very professionally. I have nothing but good stuff to say about them. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Vance & Hines XR1200 Series added to AMA schedule | Redleg | Sportster | 5 | 03-05-2010 03:04 PM |
Vance & Hines Ovals | ColdRider | Classifieds | 0 | 01-29-2009 04:00 PM |
Vance & Hines Bigshots for Dyna | Crabby Appleton | Classifieds | 3 | 12-23-2008 03:57 PM |
So much for Customer Service | Jimi | MoCo | 17 | 06-15-2007 08:34 AM |
Vance & Hines 2-1 Pipe.....????? | Q-Dog | Headers & Exhaust | 25 | 03-06-2007 10:04 PM |