|
|||||||
Ask The Techs... This is the way it works. Post up your question in the appropriate Forum, then put a link to it here. We'll ask some very savvy folks to monitor the posts here and answer your question. If you are a Tech answering a question, please do it in the linked thread rather than here. In this way, we can build info in the appropriate Forum. Thanks. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
roller rockers?
How critical/necessary is it to install roller rockers on my 1995 FXDWG? I am gathering parts to do a mild improvement - KB flat top pistons . 020 over (thanks Woody), EV 27 cam/lifters/adjustable pushrods, some carb work on stock CV, and possible some SE heads (if I can get the ebay deal im hoping for).
thanks guys |
#2
|
||||
|
||||
With that cam you really don't need rollers.......its the high lift cams ya need roller rockers on
__________________
WARNING~ I will more than likely offend you at some point in time. If I do, please let me know. I am fully qualified to not care. |
#3
|
||||
|
||||
Not needed , will just make extra noise you dont need. Over 550 lift is my rule...Otherwise like cwilks said.
__________________
Support the fuel curve..... |
#4
|
|||
|
|||
thanks guys.. should they be changed out at all for standard rockers as a matter of practice when the heads are off?? Or leave them in if they are fine? I have about 37,000 miles, most of which has been put on it since I bought this bike 2 1/2years ago..
|
#5
|
||||
|
||||
Do a good visual inspection to check for wear. Check the inner bushing and the 2 tips(spring and p-rod) and make sure they are nice and smooth with no grooves or other issues.
Chances are they are fine, but i have had to change them out on bikes with a lot more and less mileage....
__________________
Support the fuel curve..... |
#6
|
|||
|
|||
thanks.. Im hoping to do this work this week so I can keep up with you on hte way to Hillside!!!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rockers | DaSkip | Random Crap | 13 | 04-26-2010 05:26 AM |
Patches 'n' Rockers | Git Real | Random Crap | 32 | 04-13-2010 10:43 AM |
I saw both Rockers... | Xkvator | General Bike Discussions | 15 | 01-27-2008 04:13 PM |
Region rockers | Keeper | Clubhouse | 2 | 03-11-2007 02:23 PM |
4.2 roller | dynageno | Random Crap | 8 | 03-11-2007 12:11 PM |