|
|||||||
Dealer (MoCo or Indy) Feedback If they are taking care of you, we want to know. If ya got screwed, we need to know. |
|
Thread Tools | Display Modes |
#31
|
||||
|
||||
I am so sorry to hear of this for the headache and loss of hard-earned it's caused. IMO, the stand-up thing would be for the vendors involved to immediately make good at no cost asap.
The problems with GMR aren't a sudden development and there is a fair number of folks with very similar experience. After dealing with the guy myself, I have nothing good to say and I suspect we'll never see him be a sponsor here... From before its introduction there's been a lot of hoopla about the R&R crank being the greatest thing since sliced bread. However, reading between the lines, it requires additional machining to get it to fit. It also uses a proprietary rod length and a smaller diameter crank pin. Common sense tells me that in a day of ever-more-powerful motors a smaller crankpin is not a better design. So this is now the second major failure of an R&R crank I've heard of in the last month. I hope this gets straightened out and you're back on the road.
__________________
FXDoofRYDR |
#32
|
||||
|
||||
and I thought I had some problems with my bike....sorry to hear this and I agree...the vendors should be straight forward and cover your expenses...and although I have not used his services, I have heard nothing but good things about JD>>>give him a call.
__________________
Chris RIP MONGOOSE 2002 RK Police 95 Big Bore Kit, Weisco Flat Top Pistons, 9.13:1 Engine built by Wilsons of E-town,KY Vance and Hines Ovals SE Air Cleaner, K&N Filter 2006 HD Stock Heads Andrews 26G Cams Dyno'd by ENGINES BY OTTO 851st ARMY SECURITY AGENCY - Europe - 74-77
|
#33
|
||||
|
||||
EDIT IT PLEASE
I hope you can come to an agreement with the parties involved. |
#34
|
|||
|
|||
Well, here's an update. Started pulling it apart and the 2nd r&r crank is only .011 out on the pinion side. R&R put the second crank in and checked the cases. This is the fifth R&R crank to go south lately.
I didn't receive an email saying there was any responses to this post so I'm sorry it took this long to get back. I don't know what all will happen with this but I will keep you informed the best possible. I wish everyone a very Happy New year. Last edited by d1hojo07; 01-05-2010 at 11:51 PM. |
|
|