Bearing differences

[y2kflhr]

Originally Posted by stoney61

Why yes, yes they do.



Where the hell did you see a speed limit of 180?

I dunno, I was trying to remember....it was a few years ago on my way to from kingston to toronto....jeez.....160 maybe wtf....I'm old

[SafetyMan]

I ain't buyin' 160 either... that's 100mph.

You might could sell me 120.... (75mph)

[y2kflhr]

ok, I was in a parking lot, and there was a bunch of speed bumps so I got scared and parked the bike......

I was here whatever the freakin speed limit is

http://maps.google.com/maps?hl=en&ie...2,3.515625&z=9

[SafetyMan]

You're still a crack ho.

[y2kflhr]

Originally Posted by SafetyMan

You're still a crack ho.

you got 5 bucks?

[Xkvator]

Originally Posted by SafetyMan

If you're guessing "close to 1" thick" 0.749 isn't really that far off....

...

[jasilva]

Originally Posted by MegaGlide

England is where the Imperial system came from.
While we kicked them out of here, they just kind of lost interest in Canada and left on their own.

Understandable

[MegaGlide]

Originally Posted by Xkvator

...

I know, Dave.
I can usually get within .002 with my trusty sixinchrool.

[SafetyMan]

Eyeball gauges ain't that accurate.... is what I was getting at.

Especially on something round, bolted in place.


Some day I'll be perfect, until then, I have to appologize for being not....

[yolkum]

Originally Posted by stoney61

If I can find out how thick the ABS sensors are, I can machine a set of spacers to fit at work, rather than going to the dealer to have the bearings changed at $40 a bearing and approximately $200 in labor to change 'em. What pisses me off is the dealer telling me that they would swap out with no issues...... seems like their service dept. hasn't got a clue.

Did you try threatening to kill them, I hear that works at border crossings...

[stoney]

Originally Posted by yolkum

Did you try threatening to kill them, I hear that works at border crossings...

Sshhhhh.......... they won't let me back if they find out......

[stoney]

Well, I made the spacers at work to compensate for the thicker ABS bearings, based on the dimensions that Chip gave me. On the left is the old rear spacer, with the new one beside it, and the right side is the old front spacer with the new one next to it. I reassembled everything, and it seems to work fine! I had to bike out for a 50 mile jaunt with no issues. Thanks for the help Chip!

[SafetyMan]

No worries!

I told K ren that nice digital caliper would come in handy!

Sent from my most awesome DROIDX using Tapatalk