I'm dry icing my rear fender.....

[My name is Doug]

Originally Posted by Noodles

HANG ON~~~

hangin'

[Sidecar Doug]

Originally Posted by My name is Doug

Yep....I sure do need help.....if I had the wrench I might could do it myself.

Sorry, but I don't have the Wrench anymore. Last I've seen it it was on a brown truck.

[Infidel!]

Doug, you need to look behind you when you put the bike in reverse

[noodles]

Originally Posted by txhawg

Doug, you need to look behind you when you put the bike in reverse

~~~~ouch~~~~~~~~~~~~

[My name is Doug]

Originally Posted by txhawg

Doug, you need to look behind you when you put the bike in reverse

I dun figured that out twice. advice noted.......thanks

[Berserker]

I have been meaning to do this for 5 years, to my front fender. Got a dent at the top from bottoming out. Thing is the paint is intact and you don't really notice it. I wonder what this will do to paint.

Are you using heat too? Which side of dent? Any before and after pics?

[My name is Doug]

Originally Posted by Berserker

I have been meaning to do this for 5 years, to my front fender. Got a dent at the top from bottoming out. Thing is the paint is intact and you don't really notice it. I wonder what this will do to paint.

Are you using heat too? Which side of dent? Any before and after pics?

I iced the outside of the fender until it completely frosted over and then using heat on the inside I massaged the fender back to it's original state though I did make use of a rubber mallet. PM me your cell number if you can recieve pictures and I'll send you the before and after.

[Berserker]

I don't have a phone that does pics. But its free to post pictures here. You don't have to be a paying member.

Come on you low tech sumbitch... cough up some pics...

[My name is Doug]

I did sent the pics to your phone Mike.....

zerker your need to get some better technology. I don't know how to use most of this crap but at least I have it.....just sayin

I'll try and figure out how to work all this crap so I can get it on here.