#1
|
||||
|
||||
08 and up Brembo
Conversion is in the works for the front of the EG. Was looking around and saw a killer deal on take off calipers with new brake pads and brake lines. Lots of rotors on eBay at good prices. Just need late model master cylinder/lever and clutch perch.
|
#2
|
||||
|
||||
I'll keep me eyes peeled fer ya. eBay has them often if you do a search for touring parts. That's how I got the matching set for Blondies Fatboy.
__________________
Frank 2009 Vivid Black Street Glide Ultra RIP Diver, Bashful, Smitty, Clank, Johnny B, Fire46, Red Rider and Mongoose, GBNF "It is foolish to mourn the men that died. Rather we should thank God that such men lived" -General George S. Patton, Jr. |
#3
|
||||
|
||||
Warren, you'll love them.
__________________
You might be a king or a lowly street sweeper, but sooner or later you dance with the reaper. Make Doof Clenas Fun Again (MDCFA) |
#4
|
||||
|
||||
Thanks Frank.
|
#5
|
||||
|
||||
Bike needs pads anyway and its a no brainer when I saw the deal on the calipers.
|
#6
|
||||
|
||||
Htt Usually has a bunch of parts in the classifieds
Sent from my ADR6300 using Tapatalk 2
__________________
BAAAA BAAA BAAA "Blame Russ in 2012" "Can We Still Blame Russ in 2013" who's to blame in 2014? OH THIS IS SO NOODLES FAULT Chitty Chitty |
#7
|
||||
|
||||
Here's one side you'll need..... For the ones without levers, I have a spare set you can have.....
http://www.ebay.com/itm/290711744335#ht_500wt_922 http://www.ebay.com/itm/360455438892#ht_587wt_922 http://www.ebay.com/itm/360454223039 quick search turned up nothing clutch side. But I didn't dig too deep. May want to check an see I'd the VRod master cylinder will work. Clutch on those is hydro though.
__________________
Frank 2009 Vivid Black Street Glide Ultra RIP Diver, Bashful, Smitty, Clank, Johnny B, Fire46, Red Rider and Mongoose, GBNF "It is foolish to mourn the men that died. Rather we should thank God that such men lived" -General George S. Patton, Jr. |
#8
|
||||
|
||||
Just curious about why the clutch side has to be changed to do this.
What am I missing --- I am here: http://maps.google.com/maps?ll=32.504429,-94.682966
__________________
I'm not saying it was your fault. I said I'm blaming you. Ricky it's only metal, we can out think it..... Simplicate, never Complify http://www.FraZzledEgGs.com Rhetorical Questions.... Who Needs 'em? ... Famous Tripod
|
#9
|
||||
|
||||
Quote:
|
#10
|
||||
|
||||
Quote:
|
#11
|
||||
|
||||
I changed to Brembos, didn't change the clutch, I forgot about the difference until you mentioned it. Really not noticeable behind the fairing.
__________________
ISAIAH 6:1-9 ____________________________________________ for Dana Separated at birth? You decide
|
#12
|
||||
|
||||
Awesome up grade! you can use your stock master cylinder and brake lines. Just rebuild the master and flush out the dot 5 brake fluid if you are going to use dot 4.
__________________
Route 412, Bethlehem. 412 = (4, 1+2=3) = 43
|
#13
|
||||
|
||||
Well that's news. You have any take off rotors for sale?
|
#14
|
||||
|
||||
Works much better with the Brembo MC, I tried it both ways. Lever effort is really stiff with the original MC
__________________
ISAIAH 6:1-9 ____________________________________________ for Dana Separated at birth? You decide
|
#15
|
||||
|
||||
I'll check the garage and see if I still have my stock rotors.
__________________
You might be a king or a lowly street sweeper, but sooner or later you dance with the reaper. Make Doof Clenas Fun Again (MDCFA) |
|
|